Project Information

Please use this questionnaire if you would like initial information about a particular project you may be considering. Once completed, the form will be forwarded to our engineering department for assessment and action. Or, if you would prefer, please contact us directly by clicking the button below.

Any information provided in this form will remain private and confidential will be subject to treatment according to our privacy policy.

General Information

Please provide us with as much information as possible to enable us to carry out an initial assessment. Please note that any information you provide us with will be subject to our privacy policy and data protection policy.

Organisation Name *0 / 25

Street Address

City

State/Province

ZIP / Postal Code

Country

Contact Person and Position *0 / 25

Phone

Email *

Project Name *Please provide some information about the project0 / 50

Design Data Information

In this section, please provide us with as much information about the feedstock characteristics as possible, including waste type and source.

Waste Type *Principal waste type (chicken litter, pig slurry, etc)

Source of waste *Please provide details of the principal waste source

Minimum mass flow rate (tonnes/day) *

Maximum mass flow rate (tonnes/day) *

Moisture content (%)

TS (xx mg/l, or XX%)

Inorganic content (%)

VS Content (mg/l)

COD (mg/l)

BOD (mg/l)

Paper / Cardboard (%)

Feedstock temperature

Ambient Temperature (max / min)

Please describe the Potential Plant Location

In this section, please provide us with as much information about the proposed plant location, including access and distance from the substrate input and outputs.

Description of proposed plant location0 / 2500

File Uploadzip or pdf

No file chosen

Fuel and Heating Options

This section is intended to get an idea of the options that could be available for ensuring that the proposed plant can be adequately fuelled.

Is waste heat available on site?YesNo

Is there a grid connection on site?YesNo

Distance of plant to electrical connection

Permitting and Permissions

Please provide details of the type of permits, permissions or environmental standards that must be adhered to.

Permissions RequiredEnvironmental impact assessmentConstruction permitLiquid waste disposal licenseGrid connection permissionSocial impact assessmentPlanning permissionEnvironmental requirementsAsh disposal permission

Permissions Already ObtainedEnvironmental impactassessmentConstruction permitLiquid waste disposallicenseGrid connection permissionSocial impact assessmentPlanning permissionEnvironmental requirementsAsh disposal permission

Engineering Standards that will apply during construction

It is important that quality and conditions are maintained to the highest standard. Please indicate which engineering standards will apply on any potential construction project.

Which standards will apply?Which standard apply (BS, ASME, TUC…)0 / 2500

Schedule and Programming

Please indicate the preferred route to service acquisition.

What is the proposed route for this project?Open tenderRestricted tenderDirect quotationInternational tenderEU tender

Other mechanism for project acquisitionPlease advise as to the options available for provision of services

How Can Organics Assist You?Which of Organics' services would you be interested in?Manufacture and deliveryInstallationCommissioningTurnkey projectConsultancyFinance

Biogas Utilization Options

Anaerobic Digestion is not only a tried and tested technique to treat organic waste material and prepare it for conversion to a usable format, it also results in the production of biogas that can be used in a variety of ways. Potential revenue streams include:

Site electrical powerMethane for pipline injectionElectricity to the local gridMethane for site useCompressed biomethane (CBM)Heat production

Other optionsPlease provide any other information or options that may be available for using biogas

Any Other InformationPlease provide us with any other details of comments that you consider may assist in being able to provide you with as complete an initial appraisal as possible.